Create your own personalised tablecloth with this range of tablecloth fabric. Why have a plain white fabric tablecloth when you could have one that has been custom made with your photos, images and text? Choose your own material from a PVC tablecloth fabric style to a tablecloth linen fabric and have it printed with your design.
Ready in 1 - 2 day(s)
UK delivery: £5.50
Buy now, pay later
Whether you are looking to dress or protect your table, you are bound to find the ideal material in this hand-picked tablecloth fabric range.
Browse our range of tablecloth fabrics
Medium weight, stiff with no stretch, non-fray, shiny and waterproof
Medium weight, matte and smooth with no stretch, water resistant
Medium weight with no stretch, matte and smooth, no-fray and waterproof
Light weight, non-fray and non-stretch, stiff, smooth, matte and waterproof
Light weight, smooth with no stretch, matte and waterproof
Medium weight, stiff and matte, opaque with no stretch
95% cotton 5% linen
Heavy weight and non-stretch, stiff, smooth and matte, non-fray, fire retardant and waterproof
Heavy weight, stiff with no stretch, smooth, matte, opaque and waterproof
Heavy weight, soft and stretchy, matte and opaque, fire retardant and water resistant.
face: 100% PVC backing: 100% polyester
No Dry Cleaning, and No Soaking.
The material printing was exactly what I wanted. Only criticism I would have is that the sheet of material was folded leaving some very deep creases (it almost looked like it had been pressed). It would have been better supplied as a roll in a tube or more loosely folded. BOL ::::: Please lay flat for a while, rest books on it or iron gently on low heat - regs BOL
I requested a fabric print and a collection of material sample swatches. The service was prompt and my print from a photograph was excellent, I would however have liked a clear border of at least an inch all the way around the picture instead of a large border at the top although this contains the information of the material and a bar code, however around the other three sides there was no blank border of fabric, as this is required for a textile project I would have preferred a bit of extra material around all of the print, perhaps when ordering there could be a comments section stating what the print is required for to allow for this
I ordered a photo print onto canvas fabric - the quality of the print is excellent, far better than I’d expected from a photo taken on my phone, and it arrived very quickly. Excellent service!
Size of design larger than expected
I designed a fabric with a single character on and made it to what looked like a relatively medium to small size on the screen. Unfortunately when the fabric arrived the character was quite large. I can still use it but there needs to be more sizing options available for the image that you add, whether that be a description of the size of the image in cm when you add it or a better image of the fabric once created.
Tablecloths have been used for hundreds of years; in many European countries, a white or mostly white tablecloth fabric was used as a standard covering for a table. In the medieval period this would be a high-quality linen tablecloth fabric or cotton - still in white - and would represent a wealthy household. Over the course of history, tablecloths became more and more common in almost all social classes, excluding only the very poorest, and tablecloths began to get more elaborate, be made from different materials, with patterns and colours being introduced. Now that tablecloths are no longer a sign of wealth, their purposes can vary greatly; some are to dress up a table, some to protect it, and some to be easily wiped clean - especially when there are little ones around.
If you can’t decide on which photo to use, you can upload multiple images and create a photo collage. This can be done using one of our pre-set montage templates, or you can create your own entirely from scratch. It’s super easy to do and the possibilities are endless.
Step 1 – Click the start design button & select your product options.
Step 2 – Go to the ‘Images & Text Tools’ tab, click the ‘add images/Text’ button on your product & ‘Select Images to Upload’ or use the Facebook/Instagram tabs.
Step 3 – Choose the images you want to use for your collage, upload & select them from the uploaded photos list.
Step 4 – Click ‘Create montage’ & select your collage style.
Step 5 – Add the collage to your design.
Tablecloth fabrics are all printed digitally in our UK studio, your custom design is printed onto the white fabric tablecloth, in water-resistant splendour. You can then choose to have your customised tablecloth fabric hemmed, with either a folded hem using a straight stitch or an overlocked hem. If you want to finish your tablecloth fabric yourself, you can have it sent to you exactly as it comes off the printer, or with the white edges removed and your design cut on the line.
We print at 200dpi, which is a good combination of quality and file weight. Ideally, your image should be scaled to 100% at 200dpi; this means that no resizing of your file occurs, preventing any interpolation. Our design interface will have a quality marker next to the design that you have uploaded, this will change colour using a traffic light system and display a message. The message will let you know if the resolution is too low or if you have a good quality image.
When you upload your design our system will automatically scale it to fit your chosen fabric dimensions. In the ‘Product Image’ tab, the displayed dimensions under ‘Print Size’ will show the dimensions of the piece of fabric that you are ordering. For image/design dimensions you need to see the ‘Images & Text Tools’ tab. You can see and edit the dimensions of the image under the quality information next to the thumbnail.
We advise providing images in the RGB colour space. Specifically using the sRGB image profile, to achieve best colour results. What does this mean? In your editing software choose RGB as the working space, and assign the image profile as sRGB (full name sRGB IEC61966-2.1)
For most of our fabrics, there is no limit on the length of the fabric that you can order. We have a preview design window set up to 10m max to visualise the print, but that's not a print limit. If you'd like to order more, increase the quantity (x2 for 20m or x4 for 40m for example) and then you can order as much as you'd like, with a built-in automatic volume discount too. The maximum print width of each fabric can be found on the individual fabric pages or in our design interface.
Yes, that might help you! Always incorporate any extra space or boarders into your purchased fabric size. We trim squarely around fabric samples and fabric prints, leaving approximately 5mm white space. Cutting neatly on the line has an additional fee.
Crocking, which is fading along the creases, often after washing or heavy use, occurs when you digitally print on natural fabrics - more so when dark or dense colours are used. It can be minimised by using a cool hand wash instead of machine washing as the tumbling of the machine is the main cause of this. To avoid entirely, we would advise using a poly fabric.
Our organic fabrics do not have any coatings that the non-organic fabrics have. This means the ink absorbs into the fibres, reducing the colour strength slightly (by approx. -40%). For super strong colours we recommend a non-organic natural fabric.
Unfortunately not; we like to test meticulously so that we know what gets best results on our fabrics, and our facilities cater perfectly to them. We do however print sublimation paper to order, and if you have access to a heat press you can press your own fabrics easily.
For multi-coloured or very detailed files we recommend using a tiff format, but they must be flattened. For simple colours and low detail files, a jpeg is fine.
Just like many fabric printing processes, there is the potential for shrinkage. Depending on the fabric, please expect and allow between 2-8% shrinkage which you need to plan for in your dimensions. This percentage can vary from print run to print run and between fabrics, so we would advise ordering a little more material than you require for your project.
We do not offer to print on both sides of the fabric. A lot of our fabrics are semi-transparent or have some show through and this wouldn't work with double-sided printing. This is not a service that we offer on any of our fabrics.
At the moment no, our labels are all printed on the same satin fabric. We may introduce more in the future, but for now, this is the best choice. The labels are all cut the same way. You can order the fabric of your choice and make the labels yourself, but we do not cut different fabric into label format.
With environmental consciousness in mind, our fabrics are all printed using completely water-based inks. This means no chemicals or solvents are used. Our heat fixing procedure fixes the colours and prints, avoiding the downsides of steaming, such as excess or contaminated water returning into the waste system. We have one facility in London where we conduct all the printing, production and fulfilment. Rather than roll the fabrics, or send them in a tube, we fold them before they are sent out to you. This saves over 150 tubes a week, as well as a lot of space on the delivery van. (For delicate fabrics we ensure to package appropriately).
We work at improving our colour profiles all the time. Though rare it may happen that from one print run to another, and there could be slight colour differences, this is normal and part of the process when we are constantly improving. It is extremely unlikely that there will be a huge difference (like orange instead of red for example). Please bear in mind such colour variations can be intensified from fabric to fabric due to the varying grains and textures of the fabric; natural fabrics tend to have more muted colours than their poly alternatives. This is due to the construction of the materials as well as the print methods that have to be altered slightly for more delicate, natural textiles.
We have a full Cut & Sew service here at Bags of Love, and are able to hem your fabric prints for a small additional charge. We create a small one- or two-fold hem that typically uses 5 to 20mm of material, depending on the thickness of the fabric. So, for example, if you want a finished piece of fabric that measures 100 x 100cm, you will need to order a size of 101.5cm x 101.5cm to allow for the hem (on top of that please also allow for shrinkage of min 2%). The thicker the fabric, the bigger the hem will be. You can choose to have your prints hemmed with either Black or White thread. On our silk and other light woven fabrics, one hemmed edge will be straight (vertically down the roll) and the other will be slightly rippled. The hemming material allowances are as follows and you need to make your print bigger to accommodate the hem:
For further information about our fabrics see our FAQs.
Please note: As everything we provide is handmade to order, you may find a slight variance in the sizes.